F5BA722M5M6UW-J [TAIYO YUDEN]

SAW Filter, 1 Function(s), 722.5MHz,;


型号：	F5BA722M5M6UW-J
厂家：	TAIYO YUDEN (U.S.A.), INC
描述：	SAW Filter, 1 Function(s), 722.5MHz, LTE
文件：	总10页 (文件大小：363K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

[ For the TAIYO YUDEN Products excluding

Ceramic Capacitors and Inductors ]

Notice for TAIYO YUDEN Products

Please read this notice before using the TAIYO YUDEN products.

REMINDERS

■ Product information in this catalog is as of October 2018. All of the contents speciﬁed herein are subject to change

without notice due to technical improvements, etc. Therefore, please check for the latest information carefully

before practical application or use of our products.

Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or

equipment incorporating our products, which are caused under the conditions other than those speciﬁed in this

catalog or individual product speciﬁcation sheets.

■ Please contact TAIYO YUDEN for further details of product speciﬁcations as the individual product speciﬁcation

sheets are available.

■ Please conduct validation and verification of our products in actual condition of mounting and operating

environment before using our products.

■ The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA

equipment, home electric appliances, office equipment, information and communication equipment including,

without limitation, mobile phone, and PC). Please be sure to contact TAIYO YUDEN for further information

before using the products for any equipment which may directly cause loss of human life or bodily injury (e.g.,

transportation equipment including, without limitation, automotive powertrain control system, train control system,

and ship control system, trafﬁc signal equipment, disaster prevention equipment, medical equipment classiﬁed

as Class I, II or III by IMDRF, highly public information network equipment including, without limitation, telephone

exchange, and base station).

Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,

aerospace equipment, aviation equipment, medical equipment classiﬁed as Class IV by IMDRF, nuclear control

equipment, undersea equipment, military equipment).

When our products are used even for high safety and/or reliability-required devices or circuits of general electronic

equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to

install a protection circuit as necessary.

Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way

responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog

for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.

■ Information contained in this catalog is intended to convey examples of typical performances and/or applications

of our products and is not intended to make any warranty with respect to the intellectual property rights or any

other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.

■ Please note that the scope of warranty for our products is limited to the delivered our products themselves and

TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.

Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality

assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in

accordance with such agreement.

■ The contents of this catalog are applicable to our products which are purchased from our sales offices or

authorized distributors (hereinafter“TAIYO YUDENs’ofﬁcial sales channel”). Please note that the contents of this

catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’s official sales

channel.

■ Caution for Export

Some of our products listed in this catalog may require speciﬁc procedures for export according to“U.S. Export

Administration Regulations”,“Foreign Exchange and Foreign Trade Control Law”of Japan, and other applicable

regulations. Should you have any questions on this matter, please contact our sales staff.

FBAR/SAW DEVICES for MOBILE COMMUNICATIONS

REFLOW

■PARTS NUMBER

(A) Previous Rule (applied products registered on March 31, 2010 or before.)

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

⑪

⑫

①Family

④Package code

⑤Product code

⑥Common sign

⑦Frequency

②Common sign

③Series name

Code

Product

Frequency Range［MHｚ］

700 - 1000

Duplexer

Triplexer

Device

⑧Common sign

⑨Internal code

⑩Internal code

⑪Custom code

⑫Packaging

1000 - 5000

700 - 1000

Device

1000 - 5000

700 - 1000

Dual Devices

1000 - 5000

(B) New Rule (applied to products registered on April 1, 2010 or later.)

①

②

③

④

⑤

⑥

⑦

⑧

①Series name

②Package code

Code

Product

Duplexer

Triplexer

Device

Frequency Range［MHｚ］

700 - 1000

③Product code

④Frequency

1000 - 5000

700 - 1000

⑤Internal code

⑥Internal code

⑦Custom code

⑧Packaging

700 - 1000

Device

1000 - 5000

700 - 1000

Dual Devices

Quadplexer

1000 - 5000

*For further details, please contact to TAIYO YUDEN CO., LTD.

■EXTERNAL DIMENSIONS

2.5×1.6×0.5

1.8×1.4×0.5（Duplexer）

1.4×1.0×0.5

1.8+0.0/-0.2

0.5max

1.4+0.0/-0.2

index

4-0.625 4-0.325

4-0.23

7-0.23

4-0.46

0.575

8-0.30

Unit：mm

1.1×0.9×0.5

1.8×1.4×0.5（Dual Filter）

1.5×1.1×0.5

1.50±0.1

0.5max

1.10±0.1

index

1.17

0.39

0.18

0.49

0.78 0.18

0.18

0.21

0.18

0.21

Unit：mm

▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspeciﬁcationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspeciﬁcationꢀsheets.ꢀ

ꢀ

Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ

158

■PARTS NUMBER

●Duplexers

ꢀSystem

Band 1

ꢀPart number

Package Size［mm］

1.8×1.4×0.5 max.

2.0×1.6×0.5 max.

1.8×1.4×0.5 max.

1.8×1.4×0.47 max.

2.0×1.6×0.57 max.

1.8×1.4×0.57 max.

2.0×1.6×0.57 max.

1.8×1.4×0.6 max.

1.8×1.4×0.38 max.

1.8×1.4×0.5 max.

2.0×1.6×0.5 max.

1.8×1.4×0.5 max.

2.0×1.6×0.5 max.

1.8×1.4×0.5 max.

2.0×1.6×0.5 max.

1.8×1.4×0.47 max.

2.0×1.6×0.54 max.

1.8×1.4×0.54 max.

1.8×1.4×0.44 max.

2.0×1.6×0.54 max.

1.8×1.4×0.54 max.

2.0×1.6×0.5 max.

1.8×1.4×0.5 max.

1.8×1.4×0.6 max.

2.0×1.6×0.5 max.

1.8×1.4×0.5 max.

1.8×1.4×0.44 max.

1.8×1.4×0.5 max.

2.0×1.6×0.5 max.

1.8×1.4×0.5 max.

1.8×1.4×0.44 max.

2.0×1.6×0.5 max.

1.8×1.4×0.5 max.

1.8×1.4×0.44 max.

2.0×1.6×0.5 max.

1.8×1.4×0.57 max.

2.0×1.6×0.5 max.

1.8×1.4×0.6 max.

2.0×1.6×0.5 max.

1.8×1.4×0.44 max.

2.0×1.6×0.5 max.

1.8×1.4×0.44 max.

Insertion Loss［dB］ Attenuation［dB］ ꢀRemarks

D6DA2G140K2A4

D6DA2G140K2A7

D6PE2G140P3AW

D6RB2G140E1AJ

D6RB2G140E1AL

D6PF1G960M3B6

D6PF1G960M3B9

D6DA1G960K2B1

D6DA1G960K2B2

D6PE1G960P3BY

D6PE1G960P3BP

D6RB1G960E1HB

D6DA1G842K2C4

D6DA1G842K2C7

D6DA2G132K2D4

D6DA2G132K2D9

D6PE2G132P3DWB

D6RB2G132E1DF

FAR-D5PF-881M50-M3E9

D5DA881M5K2E4

FAR-D5PE-881M50-P3EZ

D5RB881M5E1BH

D6HL2G655DL06

D6HQ2G655DP01

D6HQ2G655DP02

D6HQ2G655DP03

D6DA2G655K2F1

D6HN2G655BN54

D6HP2G655BP11

D5PF942M5M3G6

D5PF942M5M3G9

D5DA942M5K2G6

D5DA942M5K2S2

D5PE942M5P3GT

D5RB942M5E1CF

D6DA1G485K2W1

D5DA737M5K2H2

D5PE782M0M3P9

D5DA782M0K2J6

D5DA793M0K2K2

D5PF740M0M3R9

D5DA740M0K2L4

D5FC847M0K3NE

D6DA1G503K2Y1

D6PE1G503P3KW

D6HQ1G962DP35

D5PF876M5M3U9

D5DA876M5K2P6

D5PE876M5P3UZ

D5PF773M0M3Y6

D5FC773M0K3NC

D5PF788M0M3Y9

D5FC788M0K3ND

D6DA2G155K2T2

1.8/1.8

1.6/1.7

1.5/1.6

1.7/1.8

2.2/2.7

1.9/2.5

1.8/2.3

2.0/3.1

2.3/3.0

2.1/2.9

2.3/2.1

1.8/1.9

1.5/1.7

1.6/1.8

1.8/1.8

1.6/1.8

1.5/1.8

1.4/1.7

2.1/2.3

2.3/2.2

2.0/2.0

2.1/2.2

1.8/2.6

1.8/2.4

2.1/2.1

1.9/2.2

1.7/1.8

1.3/1.5

1.8/2.2

1.5/1.9

1.2/1.3

1.65/1.65

1.6/2.0

1.9/1.7

1.2/2.2

1.6/1.8

1.25/1.65

1.8/1.8

1.3/1.3

1.6/2.0

2.5/2.6

2.0/1.9

1.3/2.0

2.2/2.6

1.8/2.3

2.5/2.6

1.8/2.4

1.8/1.9

2.0/2.0

56/51

58/59

59/47

57/48

57/51

55/52

57/52

54/54

55/55

57/53

56/52

56/55

56/56

60/56

57/55

60/56

55/50

62/54

58/51

58/59

59/52

58/52

53/57

58/57

58/55

61/56

50/50

55/56

56/56

57/55

60/52

58/59

58/56

60/55

56/51

58/60

63/58

64/55

58/61

50/50

61/66

65/60

55/56

60/60

55/56

57/57

56/49

60/57

60/49

60/53

57/57

60/54

63/60

57/54

Rx : Bal.100ohm

Band 2

Rx : Bal.100ohm

Band 3

Band 4

Rx : Bal.100ohm

Band 5

Band 7

Rx : Bal.100ohm

FBAR

FBAR 2HD Improved

Rx : Bal.100ohm, FBAR WLAN coexistence Ver.

Rx : Bal.100ohm, FBAR

Band 8

for LTE

Rx : Bal.100ohm

Band 11

Band 12

Band 13

Band 14

Band 17

Band 20

Band 21

Rx : Bal.100ohm

FBAR

Band 25

Band 26

Rx : Bal.100ohm

Block A

Band 28

Block B

Band 66

●Multiplexers

ꢀSystem

ꢀPart number

Package Size［mm］

2.5×2.0×0.6 max.

Insertion Loss［dB］ Attenuation［dB］ ꢀRemarks

1.6/1.9

1.9/1.9

60/49

53/55

Band 13+17 Triplexer

Band 1+3 Quadplexer

J5NA782M0P1H6

1.9/2.0

1.7/2.3

56/55

56/54

K6QZ2G140Q3ZA

2.5×2.0×0.8 max.

ꢀ

Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ

159

■PARTS NUMBER

●W-CDMA / LTE / CDMA 2000 Filters

ꢀSystem

ꢀPart number

Package Size［mm］

1.1×0.9×0.5 max.

1.1×0.9×0.44 max.

1.1×0.9×0.5 max.

1.1×0.9×0.44 max.

1.1×0.9×0.5 max.

Insertion Loss［dB］ Attenuation［dB］ ꢀRemarks

Band 1 Tx

F6QA1G950M2AA

F6QA2G140M2AM

F6QG2G140P2KA

F6QA1G880M2AQ

F6QA1G960M2AP

F6QG1G960P2KT

F6QA1G747M2QS

F6QA1G842M2AN

F6QG1G842P2KD

F5QA836M5M2AR

F5QA881M5M2AU

F5QG881M5P2KG

F6QA2G655M2QH

F6QG2G655P2KE

F5QA897M5M2AC

F5QA942M5M2AW

F5QG942M5P2KB

F5QG942M5P2KF

F5QA737M5M2QN

F5QG737M5P2KK

F5QA782M0M2AZ

F5QA751M0M2QM

F5QA763M0M2QL

F5QA710M0M2AY

F5QG740M0P2KH

F5QA806M0M2QE

F6QA1G503M2QF

F6QA1G882M2AS

F5QA876M5M2QP

F5QG876M5P2KQ

F5QA773M0M2QC

F5QA788M0M2QB

F5BA722M5M6UW

F6QP2G355R2SE

F6QA1G474H2JS

F6BA2G155M6UU

F5QA748M0M2WF

1.8

1.9

1.7

2.8

2.1

2.0

3.2

1.9

1.3

1.5

2.5

2.3

2.0

2.2

1.6

1.5

1.9

2.2

1.3

1.4

2.7

2.0

1.8

2.2

2.1

2.0

1.6

2.1

1.8

1.7

1.5

Band 1, Band 4 Rx

100ohm output

Band 2 TxꢀBC1(PCS) Tx

Band 2 RxꢀBC1(PCS) Rx

High Att.

100ohm output

Band 3 Tx

Band 3 Rx

100ohm output

High Att.

Band 5 TxꢀBC0 Tx

Band 5 RxꢀBC0 Rx

Low Loss/high Att.

100ohm output

Band 7 Rx

100ohm. High Att.

Band 8 Tx

Band 8 Rx

for LTE

100ohm output

100ohm output for LTE

Band 12 Rx

100ohm output

Band 13 Tx

Band 13 Rx

Band 14

Band 17 Tx

Band 17 Rx

Band 20 Rx

Band 21 Rx

Band 25 Tx

Band 26 Rx

100ohm output

Block A

Band 28 Rx

Block B

Band 29 Rx

Band 30 Rx

Band 32 Rx

Band 66 Rx

Band 67 Rx

●TDD Filters（TD-SCDMA / TD-LTE）

ꢀSystem

ꢀPart number

Package Size［mm］

1.1×0.9×0.44 max.

1.1×0.9×0.5 max.

1.4×1.0×0.5 max.

1.1×0.9×0.5 max.

1.1×0.9×0.44 max.

1.1×0.9×0.5 max.

1.4×1.0×0.6 max.

1.1×0.9×0.44 max.

1.1×0.9×0.5 max.

1.4×1.0×0.5 max.

Insertion Loss［dB］ Attenuation［dB］ ꢀRemarks

Band 34 TRx

Band 34 Rx

Bnad 38 Tx

Bnad 38 Rx

F6FC2G017H4PC

F6QP2G017R2SF

F6KA2G595A4VL

F6QA2G595M2QK

F6QB2G595P2BS

F6FC1G900H4PB

F6QA1G900M2WD

F6HF2G350AF41

F6HH2G350EH71

F6HH2G350EH75

F6QA2G350M2QA

F6QB2G350P2BH

F6KA2G605A4LA

1.1

1.3

1.5

1.9

2.0

1.1

1.5

2.3

1.6

1.4

2.2

2.8

2.4

Input Power +29dBm(TDD:50% Duty)

Input Powerꢀ+29dBm

Balanced 100ohm

Band 39 TRx

Band 39 Rx

Band 40 Tx

Input power +29dBm (Duty 50%)

Input Power +29dBmꢀFBAR

Input Power +29dBm CW FBAR

Input power +30.0dBm TD-LTE 40%duty 5MHz 1RB FBAR

Band 40 Rx

Balanced 100ohm

Band 41 TRx

Unbal High power design 2555-2655MHz BW100MHz

Unbal High power design & HPUE

for CMCC 2535-2655MHz BW120MHz

F6FC2G600H4PA

1.1×0.9×0.44 max.

2.1

Unbal Improved IL

F6FC2G595H4PD

1.1x0.9x0.44 max.

1.7

High power design & HPUE for CMCC

2535-2655MHz BW120MHz

F6HP2G593AP20

F6HQ2G593AP31

2.0×1.6×0.6 max.

1.8×1.4×0.57 max.

2.9

2.7

Unbal High power design 2496-2690MHz BW194MHz FBAR

Unbal High power design & HPUE

for Sprint 2496-2690MHz BW194MHz FBAR

●TDD Dual Filters（TD-SCDMA / TD-LTE）

ꢀSystem

ꢀPart number

Package Size［mm］

1.8×1.4×0.5 max.

Insertion Loss［dB］ Attenuation［dB］ ꢀRemarks

Band 39 Rx + 41(BW100MHz)

TRx(Common Input)

B41 High power design B41 (2555-2655MHz BW100MHz)

for CMCC CA

G6KJ2G605D4AB

G6QN2G605M2RM

2.1/2.6

2.2/1.3

Band 41 Rx + 39(BW100MHz)

DRx(Common Input)

1.5×1.1×0.5 max.

●GPS

ꢀSystem

GPS

ꢀPart number

Package Size［mm］

1.1×0.9×0.5 max.

1.1×0.9×0.44 max.

Insertion Loss［dB］ Attenuation［dB］ ꢀRemarks

F6QA1G575H2JF

F6QA1G585M2AT

F6QB1G585P2BQ

0.96

1.4

1.7

1.4

1.8

1.7

Low loss, High Att.

GPS (GNSS)

100ohm output

GPS+GLONASS+Galileo+Compass F6QA1G581M2QZ

F6QA1G582H2JM

Ladder High Att.

100ohm output

F6BG1G582R6TT

ꢀ

Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ

160

■PARTS NUMBER

●Others

ꢀSystem

ꢀPart number

Package Size［mm］

1.1×0.9×0.5 max.

1.4×1.0×0.5 max.

1.4×1.0×0.6 max.

1.1×0.9×0.5 max.

1.1×0.9×0.44 max.

Insertion Loss［dB］ Attenuation［dB］ ꢀRemarks

ISM900 (B.W.26MHz)

Wireless LAN / Bluetooth ®

FAR-F5QA-915M00-M2AK

FAR-F6KA-2G4418-A4VA

FAR-F6KA-2G4500-A4VD

F6KA2G436A4VE

1.8

3.0

1.9

2.5

2.8

1.6

1.3

1.0

+23dBm

2400-2500MHz,+19dBm

2400-2472MHz,+24dBm 2.5GHz High Att (for MTK)

2432-2500MHz,+24dBm 2.3GHz High Att (for MTK)

2402.5-2481.5MHz Input Power +28dBm FBAR

FBAR

F6KA2G466A4VJ

F6HF2G441AF46

F6HG2G441EG65

F6HG2G441EG66

High Att. @2.38GHz FBAR

F6FC2G441H4PE

SAW

ꢀ

Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ

161

FBAR/SAW DEVICES for MOBILE COMMUNICATIONS

■PACKAGING

①Minimum Quantity

Type

Size [mm]

2.5×2.0

2.0×1.6

1.8×1.4

2.5×2.0

2.0×1.6

1.8×1.4

1.4×1.0

1.1×0.9

1.8×1.4

1.5×1.1

Code & Quantity [pcs]

3000

10000

Duplexer

15000

Quadplexer

Triplexer

10000

15000

Single Filter

5000

3000

Dual Filter

②Tape material

●Taping dimensions

Type

Size [mm]

2.5×2.0

2.0×1.6

1.8×1.4

2.0×1.6

1.8×1.4

1.4×1.0

1.1×0.9

1.8×1.4

1.5×1.1

2.8±0.1

2.4±0.1

2.2±0.1

2.4±0.1

2.2±0.1

1.7±0.1

1.3±0.1

2.2±0.1

1.8±0.1

2.3±0.1

2.0±0.1

1.8±0.1

2.0±0.1

1.8±0.1

1.3±0.1

1.1±0.1

1.8±0.1

1.4±0.1

1.5+0.1/－0

1.05±0.05

0.5±0.05

1.05±0.05

0.5±0.05

1.5+0.1/－0

1.55±0.05

1.5+0.1/－0

1.55±0.05

1.5+0.1/－0

1.55±0.05

1.5+0.1/－0

1.0+0.1/－0.0

0.90－0.05

0.8±0.1

0.25±0.05

0.30±0.05

0.25±0.05

0.30±0.05

0.20±0.05

0.30±0.05

0.25±0.05

Unit：mm

Duplexer

0.90－0.05

0.8±0.1

Single Filter

Dual Filter

0.63±0.05

0.8±0.1

0.7±0.1

●Material of Tape（Conductive）

Tape : Polystyrene

Top cover tape : Polyethylene terephthalate（PET）and Polyethylene

③Top Tape Strength

The top tape requires a peel-off force of 0.1 to 1.0N in the direction of the arrow as illustrated below.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

sawfilter_pack_e-E07R01

④Reel size

●Material of Reel

Material : Polystyrene＋Carbon

Characteristics : Conform to EIAJ-ET-7200A

Color : Black

Surface resistance（reference value） :109Ω/sq Max.

Code

Quantity

3,000 pcs

5,000 pcs

10,000 pcs

15,000 pcs

φ180.0 +0.0/－1.5

φ330.0 ±2.0

φ66.0 ±0.5

φ100.0 ±1.0

φ13.0 ±0.2

9.0 +1.0/－0.0

9.4 ±1.0

11.4 ±1.0

13.4 ±1.0

Unit：mm

φ330.0 ±2.0

9.4 ±1.0

⑤Reel label and Reel C-Label sticking and Winding method

●Surface

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

sawfilter_pack_e-E07R01

FBAR/SAW DEVICES for MOBILE COMMUNICATIONS

■RELIABILITY DATA

1. Terminal stregth

Specified Value

No damage to be found.

Bend width 4mm, hold for 5±1 sec.

Test Methods and

Remarks

2. Mechanical shock

Specified Value

After testing, meet the specified characteristics at a room temperature.

Apply 14700m/s²for 0.5ms 5 times for each of 6 directions.

Test Methods and

Remarks

3. Vibration

Specified Value

After testing, meet the specified characteristics at a room temperature.

Test Methods and With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s²of acceleration at 55 to 500Hz, apply a

Remarks

vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz)

4. Drop 1

Specified Value

After testing, meet the specified characteristics at a room temperature.

Drop 3 times onto concrete floor from the height of 1.0m.

Test Methods and

Remarks

5. Drop 2

Specified Value

After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks

Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m.

6. Temperature cycling

Specified Value

After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks

Temp. range －40 to ＋100℃. 500cycle.

７. Static humidity

Specified Value

After testing, meet the specified characteristics at a room temperature.

Test Methods and SAW

: ＋85℃, 90% to 95%RH, apply DC5V, 1000hours.

Remarks FBAR : ＋85℃, 90% to 95%RH, apply DC0V, 1000hours.

8. High temperature storage life

Specified Value

After testing, meet the specified characteristics at a room temperature.

＋100℃, 1000hours.

Test Methods and

Remarks

9. Low temperature storage life

Specified Value

After testing, meet the specified characteristics at a room temperature.

－40℃, 1000hours.

Test Methods and

Remarks

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

sawfilter_reli_e-E07R02

10. High Temperature Bias

Specified Value

After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks

Please refer to individual specifications in detail.

11. Solderbility

Specified Value

More than 90% of area of terminals to be covered with the solder.

A change of the remarkable appearance do not have it.

Test Methods and

Remarks

Lead-free Solder paste, Reflow；Peak temperature 245℃

12. Solder heat resistance

After testing, meet the specified characteristics at a room temperature.

Specified Value

A change of the remarkable appearance do not have it.

◆Recommended temperature profile of reflow soldering

Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu.

Suitable condition for solder heating is differed depending on composition and manufacturing method.

Please contact to solder manufacturer for the details.

Test Methods and

Remarks

※ According to JIS(IEC) standard.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

sawfilter_reli_e-E07R02

FBAR/SAW DEVICES for MOBILE COMMUNICATIONS

■PRECAUTIONS

1. Storage conditions

◆Storage

1. To maintain the solderability of terminal electrodes and to keep the packaging material in good condition, care must be taken to control

temperature and humidity in the storage area. Humidity should especially be kept as low as possible.

・ Recommended conditions

Ambient temperature : －5～＋40℃

Precautions

Humidity : 40～85%RH

The ambient temperature must be kept below 30℃.

Even under ideal storage conditions, the solderbility of electrodes decreases gradually, so filters should be mounted within 1 year

from the time of delivery.

・ The packaging material should be kept where no chlorine or sulfur exists in the air.

◆Storage

Technical

1. If the parts are stocked in a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of

terminal electrodes and deterioration of taping/ packaging materials may take place. For this reason, components should be used within 1

year from the time of delivery. If exceeding the above period, please check the solderability before using the filter.

considerations

■ Please contact our sales offices for further details of specifications.

All of the standard values listed here are subject to change without notice.

Therefore, please check the specifications carefully before use.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

sawfilter_prec_e-E07R02

F5BA722M5M6UW-J [TAIYO YUDEN]

相关型号：

F5C

F5C-240.0000MHZ

F5C-25.0000MHZ-AE

F5C-2E

F5C-2E-1.000-AC

F5C-2E-1.000MHZ-AC

F5C-2E-160.000-AC

F5C-2E-160.000MHZ-AC

F5C-2E-FREQ1-OUT29

F5C-2E-FREQ2-OUT29

F5C-2E1.0000MHZ

F5C-2E12.9024MHZ